Unraveling the Biophysical Mechanisms of How Antiviral Detergents Disrupt Supported Lipid Membranes: Toward Replacing Triton X-100.

Triton X-100 (TX-100) is a membrane-disrupting detergent that is widely used to inactivate membrane-enveloped viral pathogens, yet is being phased out due to environmental safety concerns. Intense efforts are underway to discover regulatory acceptable detergents to replace TX-100, but there is scarce mechanistic understanding about how these other detergents disrupt phospholipid membranes and hence which ones are suitable to replace TX-100 from a biophysical interaction perspective. Herein, using the quartz crystal microbalance-dissipation (QCM-D) and electrochemical impedance spectroscopy (EIS) techniques in combination with supported lipid membrane platforms, we characterized the membrane-disruptive properties of a panel of TX-100 replacement candidates with varying antiviral activities and identified two distinct classes of membrane-interacting detergents with different critical micelle concentration (CMC) dependencies and biophysical mechanisms. While all tested detergents formed micelles, only a subset of the detergents caused CMC-dependent membrane solubilization similarly to that of TX-100, whereas other detergents adsorbed irreversibly to lipid membrane interfaces in a CMC-independent manner. We compared these biophysical results to virus inactivation data, which led us to identify that certain membrane-interaction profiles contribute to greater antiviral activity and such insights can help with the discovery and validation of antiviral detergents to replace TX-100.

Decellularized tissue exhibits large differences of extracellular matrix properties dependent on decellularization method: novel insights from a standardized characterization on skeletal muscle.

Decellularized matrices are an attractive choice of scaffold in regenerative medicine as they can provide the necessary extracellular matrix (ECM) components, signals and mechanical properties. Various detergent-based protocols have already been proposed for decellularization of skeletal muscle tissue. However, a proper comparison is difficult due to differences in species, muscle origin and sample sizes. Moreover, a thorough evaluation of the remaining acellular matrix is often lacking. We compared an in-house developed decellularization protocol to four previously published methods in a standardized manner. Porcine skeletal muscle samples with uniform thickness were subjected to in-depth histological, ultrastructural, biochemical and biomechanical analysis. In addition, 2D and three-dimensional cytocompatibility experiments were performed. We found that the decellularization methods had a differential effect on the properties of the resulting acellular matrices. Sodium deoxycholate combined with deoxyribonuclease I was not an effective method for decellularizing thick skeletal muscle tissue. Triton X-100 in combination with trypsin, on the other hand, removed nuclear material but not cytoplasmic proteins at low concentrations. Moreover, it led to significant alterations in the biomechanical properties. Finally, sodium dodecyl sulphate (SDS) seemed most promising, resulting in a drastic decrease in DNA content without major effects on the ECM composition and biomechanical properties. Moreover, cell attachment and metabolic activity were also found to be the highest on samples decellularized with SDS. Through a newly proposed standardized analysis, we provide a comprehensive understanding of the impact of different decellularizing agents on the structure and composition of skeletal muscle. Evaluation of nuclear content as well as ECM composition, biomechanical properties and cell growth are important parameters to assess. SDS comes forward as a detergent with the best balance between all measured parameters and holds the most promise for decellularization of skeletal muscle tissue.

Innovative approaches in cloud-point extraction.

Cloud-point extraction (CPE) is a pre-treatment technique for the extraction and preconcentration of different chemical compounds, such as metal ions, pesticides, drugs, phenols, vitamins etc., from various samples. CPE is based on the phenomenon of two phases (micellar and aqueous) forming after the heating of an aqueous isotropic solution of a non-ionic or zwitterionic surfactant above the cloud-point temperature. If analytes are added to the surfactant solution under suitable conditions, they should be extracted into the micellar phase, also called the surfactant-rich phase. Recently, the traditional CPE procedure is being increasingly replaced by improved CPE procedures. In this study, recent advances in CPE over the last three years (2020 - 2022), including the application of various innovative approaches, are reviewed. In addition to the basic principle of CPE, alternative extraction media in CPE, CPE supported by various auxiliary energies, a different modified CPE procedure and the use nanomaterials and solid-phase extraction in combination with CPE are presented and discussed. Finally, some future trends for improved CPE are presented.

Effect of surfactants on the sorption-desorption, degradation, and transport of chlorothalonil and hydroxy-chlorothalonil in agricultural soils.

The fungicide chlorothalonil (CTL) and its metabolite hydroxy chlorothalonil (OH-CTL) constitute a risk of soil and water contamination, highlighting the need to find suitable soil remediation methods for these compounds. Surfactants can promote the bioavailability of organic compounds for enhanced microbial degradation, but the performance depends on soil and surfactant properties, sorption-desorption equilibria of contaminants and surfactants, and possible adverse effects of surfactants on microorganisms. This study investigated the influence of five surfactants [e.g., Triton X-100 (TX-100), sodium dodecyl sulphate (SDS), hexadecyltrimethylammonium bromide (HDTMA), Aerosol 22 and Tween 80] on the sorption-desorption, degradation, and mobility of CTL and OH-CTL in two volcanic and one non-volcanic soil. Sorption and desorption of fungicides depended on the sorption of surfactants on soils, surfactants' capacity to neutralize the net negative charge of soils, surfactants' critical micellar concentration, and pH of soils. HDTMA was strongly adsorbed on soils, which shifted the fungicide sorption equilibria by increasing the distribution coefficient (Kd) values. Contrarily, SDS and TX-100 lowered CTL and OH-CTL sorption on soils by decreasing the Kd values, which resulted in an efficient extraction of the fungicide compounds from soil. SDS increased the degradation of CTL, especially in the non-volcanic soil (DT50 values were 14 and 7 days in natural and amended soils, with final residues <7% of the initial dose), whereas TX-100 enabled an early start and sustenance of OH-CTL degradation in all soils. CTL and OH-CTL stimulated soil microbial activities without noticeable deleterious effects of the surfactants. SDS and TX-100 also reduced the vertical transport of OH-CTL in soils. Results of this study could be extended to soils in other regions of the world because the tested soils represent widely different physical, chemical, and biological properties.

Biomimetic vascular tissue engineering by decellularized scaffold and concurrent cyclic tensile and shear stresses.

Decellularization by chemical approaches has harmful effects on extracellular matrix (ECM) proteins, and damages lots of functional peptides and biomolecules present in the ultrastructure. In this study, we employed a combination of chemical and physical decellularization methods to overcome these disadvantages. The induced osmotic pressure by hypertonic/hypotonic solutions dissociated and removed most of cellular membranes significantly without any detergent or chemical agent. In total, 0.025% trypsin solution was found adequate to remove the remaining debrides, and ultimately 1% Triton X-100 was utilized for final cleansing. In addition, conducting all the decellularization processes at 4 °C yielded an ECM with least damages in the ultrastructure which could be inferred by close mechanical strength and swelling ratio to the native vessel, and high quality and quantity of cell attachment, migration and proliferation which were examined by optical microscopy and scanning electron microscopy (SEM) of the histology samples. Moreover, the obtained biological scaffold (BS) had no cytotoxicity according to the MTT assay, and this scaffold is storable at -20 °C. Employing bioreactor for concurrent cyclic tensile and shear stresses improved the cell migration into pores of the BS and made the cells and the scaffold compact in analogous to native tissue. As opening angle test showed by decellularizing of the blood vessel, the residual stress dropped significantly which revealed the role of cells in the amount of induced stress in the structure. However, intact and healthy ECM explicitly recovered upon recellularization and beat the initial residual stress of the native tissue. The tensile test of the blood vessels in longitudinal and radial directions revealed orthotropic behavior which can be explained by collagen fibers direction in the ECM. Furthermore, by the three regions of the stress-strain curve can be elucidated the roles of cells, elastin and collagen fibers in mechanical behavior of the vascular tissues.

Beyond the standard model of solubilization: Non-ionic surfactants induce collapse of lipid vesicles into rippled bilamellar nanodiscs.

HYPOTHESIS: Although solubilization of lipid membranes has been studied extensively, questions remain regarding the structural pathways and metastable structures involved. This study investigated whether the non-ionic detergent Triton X-100 follows the classical solubilization pathway or if intermediate nanostructures are formed. EXPERIMENTS: Small angle X-ray and neutron scattering (SAXS/SANS) was used in combination with transmission electron cryo-microscopy and cryo-tomography to deduce the structure of mixtures of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) vesicles and Triton X-100. Time-resolved SAXS and dynamic light scattering were used to investigate the kinetics of the process. FINDINGS: Upon addition of moderate detergent amounts at low temperatures, the lipid vesicles implode into ordered rippled bilamellar disc structures. The bilayers arrange in a ripple phase to accommodate packing constraints caused by inserted TX-100 molecules. The collapse is suggested to occur through a combination of water structure destabilization by detergents flipping across the membrane and osmotic pressure causing interbilayer attraction internally. The subsequently induced ripples then stabilize the aggregates and prevent solubilization, supported by the observation that negatively charged vesicles undergo a different pathway upon TX-100 addition, forming large bicelles. The findings demonstrate the richness in assembly pathways of simple lipids and detergents and stimulate considerations for the use of certain detergents in membrane solubilization.

Pathways of Membrane Solubilization: A Structural Study of Model Lipid Vesicles Exposed to Classical Detergents.

Understanding the pathways of solubilization of lipid membranes is of high importance for their use in biotechnology and industrial applications. Although lipid vesicle solubilization by classical detergents has been widely investigated, there are few systematic structural and kinetic studies where different detergents are compared under varying conditions. This study used small-angle X-ray scattering to determine the structures of lipid/detergent aggregates at different ratios and temperatures and studied the solubilization in time using the stopped-flow technique. Membranes composed of either of two zwitterionic lipids, DMPC or DPPC, and their interactions with three different detergents, sodium dodecyl sulfate (SDS), n-dodecyl-beta-maltoside (DDM), and Triton X-100 (TX-100), were tested. The detergent TX-100 can cause the formation of collapsed vesicles with a rippled bilayer structure that is highly resistant to TX-100 insertion at low temperatures, while at higher temperatures, it partitions and leads to the restructuring of vesicles. DDM also causes this restructuring into multilamellar structures at subsolubilizing concentrations. In contrast, partitioning of SDS does not alter the vesicle structure below the saturation limit. Solubilization is more efficient in the gel phase for TX-100 but only if the cohesive energy of the bilayer does not prevent sufficient partitioning of the detergent. DDM and SDS show less temperature dependence compared to TX-100. Kinetic measurements reveal that solubilization of DPPC largely occurs through a slow extraction of lipids, whereas DMPC solubilization is dominated by fast and burst-like solubilization of the vesicles. The final structures obtained seem to preferentially be discoidal micelles where the detergent can distribute in excess along the rim of the disc, although we do observe the formation of worm- and rodlike micelles in the case of solubilization of DDM. Our results are in line with the suggested theory that bilayer rigidity is the main factor influencing which aggregate is formed.

Rhodamine 6G-Anionic Surfactant System Modified by Triton X-100 for Fluorescence Determination of Albumin.

The influence of sodium hexadecyl sulfate on the nature of the fluorescence spectra of rhodamine 6G in an aqueous solution and a solution of nonionic Triton X-100 was investigated. The change in the nature of the emission spectra is explained by the formation of hydrophobic stoichiometric and sub-stoichiometric reagent-surfactant associates. Stabilization of the colloid-chemical state and reduction of the total turbidity of rhodamine 6G-anionic surfactant associate solutions with the addition of nonionic surfactant as a modifier were registered. The method of modification of the rhodamine 6G-sodium hexadecyl sulfate system with a nonionic surfactant was used in the development of conditions for the fluorescence determination of protein substances in physiological solutions. The concentration conditions for the use of the modified reagent system rhodamine 6G-anionic surfactant-nonionic surfactant for the fluorescence determination of albumin in urine were optimized.

Physico-chemical parameters of phase separation of the mixture of BSA and triton X 100 in aqueous solutions of monohydroxy compounds.

Clouding behavior and thermodynamic properties for the TX 100 + BSA mixture were investigated in aqueous and aq. alcoholic media. In an aqueous environment, the values of cloud point (CP), at which a clear solution becomes cloudy, for TX 100 decreases with augmentation of the concentration of BSA. The reverse result was obtained in the aq. alcoholic media. In this study, we have used ethanol (EtOH), 1-propanol (1-PrOH), and 2-butanol (2-BuOH) as alcohols. The changes of CP values in alcoholic media have been obtained in the following order: CPH2O+EtOH > CPH2O+2-BuOH > CPH2O+1-PrOH. The standard free energy (∆Gco), standard enthalpy (∆Hco), and standard entropy (∆Sco) changes of clouding were derived at CP. The ΔGc0 values of TX 100 + BSA decreases in the aqueous and alcoholic media with increasing the concentration of BSA and alcohol. This process becomes endothermic in the aq. alcoholic media. Different thermodynamic properties of transfer and entropy-enthalpy compensation parameters for the phase partitioning of the TX 100 + BSA mixture have been calculated and assessed properly.

Cloud point extraction assisted spectrophotometric quantification of trace boron impurity in uranium-based nuclear fuels.

The separation of boron in nuclear fuels by cloud point extraction (CPE) has been a challenge due to high acidity of digested sample solutions. High acidity hampers the coacervation of micelles. As a result, the cloud point temperature increases and thus could cause the inevitable loss of boron as volatile species. Herein we have proposed a novel CPE-assisted colorimetric method for the quantification of traces of boron (B) in uranium-based fuels. A 1:1 mixture of 2-ethyl hexane-1,3-diol (EHD) and curcumin dispersed in Triton X-114 surfactant was used in the proposed CPE process. We had investigated several compounds to act as micelle surface modifiers. Among them, only bromine water (Br2) was found not only to lower the cloud point temperature (CPT, from 80 °C to 42 ± 2 °C) but also resulted in the quantitative recovery of boron (≥95%). The CPE of boron from uranium matrix in a 2.0 mol L-1 HCl medium was suitable for direct chemical quality assurance of routine uranium-based fuels. The molar extinction coefficient of the boron-EHD-curcumin complex was found to be 4.75 × 105 L mol-1 cm-1 (λmax at 458 nm) in N,N-dimethyl formamide medium. The linear dynamic range and detection limit of the proposed analytical procedure were calculated to be 10-150 ng mL-1 and 0.8 ng mL-1 respectively. The proposed analytical methodology was validated by analysis of three in-house working reference materials of uranium. Determination of traces of boron in two uranium dioxide and two metallic uranium samples were found to demonstrate the applicability of the method. The relative standard deviation of the proposed method was found to be of 3-5%.

Characterization of decellularized chicken skin as a tissue engineering scaffold.

Decellularization has been applied to many tissues and organs to obtain biomaterials for applications in tissue engineering. In this study, decellularization and characterization of chicken skin was performed to provide comprehensive information and in-depth details on this material as a potential tissue scaffold. Application of Triton X-100 and sodium dodecyl sulfate (SDS) on tissues at different time intervals as two decellularization protocols were compared according to various aspects, such as removal of cellular components, DNA quantification, protection of extracellular matrix (ECM), mechanical properties, and cytocompatibility, to find the optimum technique during preparation of decellularized scaffolds. The results showed that treatment with SDS revealed better results when compared with Triton X-100 regarding the preservation of tissue structure and morphology, although there was no difference in the efficiency of decellularization. In general, the tissues decellularized with SDS demonstrated higher levels of cytocompatibility and better mechanical properties in comparison with samples treated with Triton X-100. In conclusion, this study revealed that decellularized chicken skin is a cheap, abundant, and biocompatible material that supports cell attachment, growth, and proliferation. Therefore, it could be used as a proper candidate to prepare scaffolds for further studies on tissue engineering, especially for skin tissue engineering.

Supported Lipid Bilayer Platform for Characterizing the Membrane-Disruptive Behaviors of Triton X-100 and Potential Detergent Replacements.

Triton X-100 (TX-100) is a widely used detergent to prevent viral contamination of manufactured biologicals and biopharmaceuticals, and acts by disrupting membrane-enveloped virus particles. However, environmental concerns about ecotoxic byproducts are leading to TX-100 phase out and there is an outstanding need to identify functionally equivalent detergents that can potentially replace TX-100. To date, a few detergent candidates have been identified based on viral inactivation studies, while direct mechanistic comparison of TX-100 and potential replacements from a biophysical interaction perspective is warranted. Herein, we employed a supported lipid bilayer (SLB) platform to comparatively evaluate the membrane-disruptive properties of TX-100 and a potential replacement, Simulsol SL 11W (SL-11W), and identified key mechanistic differences in terms of how the two detergents interact with phospholipid membranes. Quartz crystal microbalance-dissipation (QCM-D) measurements revealed that TX-100 was more potent and induced rapid, irreversible, and complete membrane solubilization, whereas SL-11W caused more gradual, reversible membrane budding and did not induce extensive membrane solubilization. The results further demonstrated that TX-100 and SL-11W both exhibit concentration-dependent interaction behaviors and were only active at or above their respective critical micelle concentration (CMC) values. Collectively, our findings demonstrate that TX-100 and SL-11W have distinct membrane-disruptive effects in terms of potency, mechanism of action, and interaction kinetics, and the SLB platform approach can support the development of biophysical assays to efficiently test potential TX-100 replacements.

Assessing detergent-mediated virus inactivation, protein stability, and impurity clearance in biologics downstream processes.

Detergent-mediated virus inactivation (VI) provides a valuable orthogonal strategy for viral clearance in mammalian processes, in particular for next-generation continuous manufacturing. Furthermore, there exists an industry-wide need to replace the conventionally employed detergent Triton X-100 with eco-friendly alternatives. However, given Triton X-100 has been the gold standard for VI due its minimal impact on protein stability and high inactivation efficacy, inactivation by other eco-friendly detergents and its impact on protein stability is not well understood. In this study, the sugar-based detergent commonly used in membrane protein purification, n-dodecyl-ß- d-maltoside was found to be a promising alternative for VI. We investigated a panel of detergents to compare the relative VI efficacy, impact on therapeutic quality attributes, and clearance of the VI agent and other impurities through subsequent chromatographic steps. Detergent-mediated inactivation and protein stability showed comparable trends to low pH inactivation. Using experimental and modeling data, we found detergent-mediated product aggregation and its kinetics to be driven by extrinsic factors such as detergent and protein concentration. Detergent-mediated aggregation was also impacted by an initial aggregation level as well as intrinsic factors such as the protein sequence and detergent hydrophobicity, and critical micelle concentration. Knowledge gained here on factors driving product stability and VI provides valuable insight to design, standardize, and optimize conditions (concentration and duration of inactivation) for screening of detergent-mediated VI.

Detection of superoxide radical in all biological systems by Thin Layer Chromatography.

The study presents a new method that detects O2•-, via quantification of 2-hydroxyethidium (2-ΟΗ-Ε+) as low as ∼30 fmoles by High-Performance Thin Layer Chromatography (HPTLC). The method isolates 2-ΟΗ-Ε+ after its extraction by the anionic detergent SDS (at 18-fold higher than its CMC) together with certain organic/inorganic reagents, and its HPTLC-separation from di-ethidium (di-Ε+) and ethidium (Ε+). Quantification of 2-OH-E+ is based on its ex/em maxima at 290/540 nm, and of di-E+ and E+ at 295/545 nm. The major innovations of the present method are the development of protocols for (i) efficient extraction (by SDS) and (ii) sensitive quantification (by HPTLC) for 2-OH-E+ (as well as di-E+ and E+) from most biological systems (animals, plants, cells, subcellular compartments, fluids). The method extracts 2-ΟΗ-Ε+ (by neutralizing the strong binding between its quaternary N+ and negatively charged sites on phospholipids, DNA etc) together with free HE, while protects both from biological oxidases, and also extracts/quantifies total proteins (hydrophilic and hydrophobic) for expressing O2•- levels per protein quantity. The method also uses SDS (at 80-fold lower than its CMC) to extract/remove/wash 2-ΟΗ-Ε+ from cell/organelle exterior membrane sites, for more accurate internal content quantification. The new method is applied on indicative biological systems: (1) artificially stressed (mouse organs and liver mitochondria and nuclei, ±exposed to paraquat, a known O2•- generator), and (2) physiologically stressed (cauliflower plant, exposed to light/dark).

A novel method for providing scaffold: Decellularization of parathyroid capsule.

This study aimed to generate a novel biomatrix from the decellularized human parathyroid capsule using different methods and to compare the efficiency of decellularization in the means of cell removal, structural integrity and extracellular matrix preservation. The parathyroid capsules, which were carefully dissected from the parathyroid tissue, were randomly divided into four groups and then decellularized using three different protocols: freeze-thaw only, sodium dodecyl sulphate and Triton X-100 treatments after freeze-thawing. Quantitative DNA analysis, agarose gel electrophoresis, sulphated glycosaminoglycan assay, histological analysis, immunohistochemistry and scanning electron microscopy were used to observe the efficiency of parathyroid capsule decellularization and preservation of extracellular matrix components. Considering all the results, it can be said that only freeze-thawing is not an effective method in parathyroid capsule decellularization. When the tissue was treated with a detergent agent in addition to freeze-thawing, the amount of DNA decreased by 90% while sulphated glycosaminoglycan amount maintained 50% compared to untreated tissue. Comparing the effects of the two detergents on the preservation of extracellular matrix such as collagen and sulphated glycosaminoglycan, it was seen that the integrity of tissues treated with Triton X-100 was preserved more than tissues treated with sodium dodecyl sulphate. It is concluded that Triton X-100 treatment with freeze-thawing is the most suitable and effective method for decellularizing the human parathyroid capsule. The biomatrix obtained with this method can be applied in the transplantation of parathyroid tissue and other endocrine tissue types in the body.

Decellularization with triton X-100 provides a suitable model for human kidney bioengineering using human mesenchymal stem cells.

AIMS: Regeneration of discarded human kidneys has been considered as an ideal approach to overcome organ shortage for the end-stage renal diseases (ESRDs). The aim of this study was to develop an effective method for preparation of kidney scaffolds that retain the matrix structure required for proliferation and importantly, differentiation of human adipose-derived mesenchymal stem cells (hAd-MSCs) into renal cells. MAIN METHODS: We first compared two different methods using triton X-100 and sodium dodecyl sulfate (SDS) for human kidney decellularization; followed by characterization of the prepared human renal extracellular matrix (ECM) scaffolds. Then, hAd-MSCs were seeded on the scaffolds and cultured for up to 3 weeks. Next, viability, proliferation, and migration of seeded hAd-MSCs underwent histological and scanning electron microscopy (SEM) assessments. Moreover, differentiation of hAd-MSCs into kidney-specific cell types was examined using immunohistochemistry (IHC) staining and qRT-PCR. KEY FINDINGS: Our results indicated that triton X-100 was a more effective detergent for decellularization of human kidneys compared with SDS. Moreover, attachment and proliferation of hAd-MSCs within the recellularized human kidney scaffolds, were confirmed. Seeded cells expressed epithelial and endothelial differentiation markers, and qRT-PCR results indicated increased expression of platelet and endothelial cell adhesion molecule 1 (PECAM-1), paired box 2 (PAX2), and E-cadherine (E-CDH) as markers of differentiation into epithelial and endothelial cells. SIGNIFICANCE: These observations indicate the effectiveness of decellularization with triton X-100 to generate suitable human ECM renal scaffolds, which supported adhesion and proliferation of hAd-MSCs and could induce their differentiation towards a renal lineage.

Preparation of decellularized optic nerve grafts.

BACKGROUND: Decellularized tissues based on well-conserved extracellular matrices (ECMs) are a common area of research in tissue engineering. Although several decellularization protocols have been suggested for several types of tissues, studies on the optic nerve have been limited. METHODS: We report decellularization protocol with different detergent for the preparation of acellular optic nerve and tissues were examined. DNA, glycosaminoglycan (GAG), and collagen content of the groups were evaluated with biochemical analyses and examined with histological staining. Mechanical properties, chemical components as well as cytotoxic properties of tissues were compared. RESULTS: According to the results, it was determined that TX-100 (Triton X-100) was insufficient in decellularization when used alone. In addition, it was noticed that 85% of GAG content was preserved by using TX-100 and TX-100-SD (sodium deoxycholate), while this ratio was calculated as 30% for SDS. In contrast, the effect of the decellularization protocols on ECM structure of the tissues was evaluated by scanning and transmission electron microscopy (SEM and TEM) and determined their mechanical properties. Cytotoxicity analyses were exhibited minimum 95% cell viability for all groups, suggesting that there are no cytotoxic properties of the methods on L929 mouse fibroblast cells. CONCLUSIONS: The combination of TX-100-SD and TX-100-SDS (sodium dodecyl sulfate) were was determined as the most effective methods to the literature for optic nerve decellularization.

Allosteric modulators enhance agonist efficacy by increasing the residence time of a GPCR in the active state.

Much hope in drug development comes from the discovery of positive allosteric modulators (PAM) that display target subtype selectivity and act by increasing agonist potency and efficacy. How such compounds can allosterically influence agonist action remains unclear. Metabotropic glutamate receptors (mGlu) are G protein-coupled receptors that represent promising targets for brain diseases, and for which PAMs acting in the transmembrane domain have been developed. Here, we explore the effect of a PAM on the structural dynamics of mGlu2 in optimized detergent micelles using single molecule FRET at submillisecond timescales. We show that glutamate only partially stabilizes the extracellular domains in the active state. Full activation is only observed in the presence of a PAM or the Gi protein. Our results provide important insights on the role of allosteric modulators in mGlu activation, by stabilizing the active state of a receptor that is otherwise rapidly oscillating between active and inactive states.

Effectiveness of dual-detergent strategy using Triton X-100 in membrane protein purification.

Membrane solubilization by detergents is a critical step for successful membrane protein purification. Alkyl maltoside detergents such as DDM and DM are very expensive and are commonly used to produce most of the high-quality proteins in stable and functional form. Recently, dual-detergent strategy using inexpensive detergents for membrane solubilization step has been shown to be highly effective in purifying different classes of membrane proteins in a cost-effective manner. In this work, we have monitored the effectiveness of 'dual-detergent strategy' towards successful purification of the isolated voltage sensing domain (VSD) of KvAP and the inward rectifying K+ channel, KirBac1.1. We demonstrate that the inexpensive detergent Triton X-100 extracts the activated conformation of the KvAP-VSD well without compromising the structural integrity of the sensor, and also retains its proper structural dynamics. Importantly, the cost associated with solubilizing the KvAP sensor can be reduced by ∼2000 fold. To the best of our knowledge, our results constitute the first report characterizing the purification of KvAP voltage sensor using an inexpensive detergent. However, the dual-detergent strategy using Triton X-100 for membrane solubilization is not effective for the purification of inward rectifying K+ channel, KirBac1.1 even in presence of high salt concentration during solubilization. We propose that the dual-detergent strategy will be useful for extracting stable and functional proteins that are both DDM- and DM-extractable, but will be ineffective if the protein is only DM-extractable. The relevance of the effectiveness of dual-detergent strategy with respect to the hydrophobic thickness of proteins is discussed.

Effects of Microenvironmental Changes on the Fluorescence Signal of Alternariol: Magnesium Induces Strong Enhancement in the Fluorescence of the Mycotoxin.

Alternariol (AOH) is an emerging mycotoxin produced by Alternaria molds. It occurs as a contaminant e.g., in oilseeds, cereals, grapes, and tomatoes. Chronic exposure to AOH may cause genotoxic and endocrine disruptor effects. Our recent studies demonstrated that the fluorescence signal of AOH can be strongly affected by the environmental pH as well as by the presence of serum albumin or cyclodextrins. In the current study, we aimed to characterize the most optimal circumstances regarding the highly sensitive fluorescent detection of AOH. Therefore, the further detailed investigation of the microenvironment on the fluorescence signal of the mycotoxin has been performed, including the effects of different buffers, organic solvents, detergents, and cations. Organic solvents (acetonitrile and methanol) caused only slight increase in the emission signal of AOH, while detergents (sodium dodecyl sulfate and Triton-X100) and Ca2+ induced considerably higher enhancement in the fluorescence of the mycotoxin. In addition, Mg2+ proved to be a superior fluorescence enhancer of the AOH. Spectroscopic and modeling studies suggest the formation of low-affinity AOH-Mg2+ complexes. The effect of Mg2+ was also tested in two HPLC assays: Our results show that Mg2+ can considerably increase the fluorescence signal of AOH even in a chromatographic system.